Excel template to EUDAMED bulk upload XML for legacy devices
The MEDEX EUDAMED XML Generator turns an Excel template into the XML file that EUDAMED accepts for the bulk upload of legacy devices placed on the market under the MDD or the AIMDD. You fill in the template, the tool checks your data, lists every problem by sheet, row and field, and writes the XML file you upload to EUDAMED. The tool has been tested in EUDAMED with legacy device uploads. To see it and receive the terms of use, request a proposal.
Who this is for
Manufacturers with many legacy devices who will register them in EUDAMED with their own team.
Manufacturers with product families that have many variants, where entering devices one by one in the user interface is not practical.
Authorised representatives and consultants who handle EUDAMED device registration for several manufacturers.
Regulatory basis
Legacy devices are not exempt from EUDAMED device registration. The amendment made by Regulation (EU) 2024/1860 sets the deadline from the publication of the EUDAMED notice:
"no later than 12 months from the date of publication of the notice referred to in Article 34(3) in respect of the electronic system referred to in Article 33(2), points (a) and (b), manufacturers shall ensure that the information to be entered in Eudamed in accordance with Article 29 is entered in that electronic system, including regarding the following devices, provided that those devices are also placed on the market from 6 months from the date of publication of that notice:" (MDR Article 123(3)(e), as replaced by Regulation (EU) 2024/1860)
The second group in that list covers legacy devices:
"(ii) devices, other than custom-made devices, placed on the market pursuant to Article 120(3), (3a) or (3b), unless the device, for which the manufacturer has undertaken a conformity assessment in accordance with Article 52, is already registered in Eudamed;" (MDR Article 123(3)(e)(ii))
EUDAMED itself recommends a data entry route by the number of devices:
"If you must register up to 100 devices, then use the EUDAMED user interface. If you must register 100-1000 devices, then use the bulk upload/download. If you must register more than 1000 devices, then use the M2M data exchange." (EUDAMED, Modes of data input)
The EUDAMED notice on the first four modules was published in the Official Journal on 27 November 2025. Counting from that date, the obligations under Article 123(3)(d) apply from 28 May 2026 and the device data under Article 123(3)(e) must be in EUDAMED by 28 November 2026. The generator produces the file for the bulk upload route. The timeline for legacy devices is explained in our article on mandatory EUDAMED registration of legacy devices.
What the tool does
Reads the MEDEX Excel template: devices on one sheet with one row per UDI-DI, manufacturer and certificate data on a second sheet, warning sets on a third.
Checks the template version, mandatory fields, code lists, the GTIN check digit, duplicate UDI-DIs and Basic UDI-DIs, the risk class and certificate type against the legislation, whether a certificate is needed, the storage and warning texts EUDAMED requires, and dates.
Shows errors and warnings in one table and lets you download the check report as an Excel file.
Leaves out devices that are already registered, when you load the EUDAMED download file or a list of UDI-DIs.
Splits long device lists into several XML files, each uploaded to EUDAMED one at a time.
Reads the response file EUDAMED returns after the upload and shows the result per Basic UDI-DI with EUDAMED's own message.
What the template contains
The template has four sheets. The instructions sheet explains the filling rules. The manufacturer sheet holds your actor ID or SRN, the default legislation and your certificates, one per row. The warnings sheet defines warning sets, each with an ID and one or more warning codes. The devices sheet has one row per UDI-DI, with the device name as written in the declaration of conformity, the reference number as written on the label, risk class, EMDN codes, trade names, market status and country, the yes or no characteristics EUDAMED asks for, storage conditions, clinical sizes and the certificate the device belongs to. Mandatory headers are red and coded fields have drop-down lists.
Uploading to EUDAMED
The tool tells you to upload each file in the EUDAMED data transfer section, using the bulk upload service for legacy and regulation devices, one file at a time. After the upload you download the response file from EUDAMED's upload management screen and load it into the tool. For each Basic UDI-DI it shows whether the record was accepted and, where it was not, the field and the message EUDAMED returned. You correct the template and generate a new file for the rejected devices only.
Where your data is processed
Your Excel file is processed only in your own browser. The tool does not upload or send your data anywhere. You upload the XML file it produces to EUDAMED from your own account.
What the tool does not do
It does not decide the technical content of the device record. Names, risk class, EMDN code and certificate data remain the manufacturer's responsibility; the tool checks format and EUDAMED rules.
It does not upload to EUDAMED on your behalf.
The current version covers legacy devices under the MDD and the AIMDD. Devices under the IVDD, and devices under the MDR or the IVDR, are outside this version.
Actor registration and obtaining your SRN are outside the tool. See EUDAMED actor registration and the SRN.
How to obtain it
The tool is provided against a proposal. After your request we show the tool and the template in a screen sharing session on a sample device list. The terms of use and the scope are set out in the proposal. If you would rather hand the whole EUDAMED device registration to us, we use the same tool in our EUDAMED registration service.
Process
In your request, tell us the number of devices, the product families and the legislation of your legacy devices.
We show the tool and the template in a screen sharing session.
After you accept the proposal, we deliver the tool and the blank template.
You fill in the template, correct it against the check report and upload the XML file to EUDAMED.
What you receive
The EUDAMED XML Generator.
The blank MEDEX EUDAMED device template and a filled example.
A description of the template fields.
What we need from you
The number of devices to register and the product families.
The legislation of the devices: MDD or AIMDD.
The status of your EUDAMED actor registration and your SRN.
Related services
Frequently asked questions
Which devices does the generator support?
Legacy devices placed on the market under the MDD or the AIMDD. It has been tested in EUDAMED with legacy device uploads.
Can I use it for MDR devices?
Not in this version. For EUDAMED registration of MDR and IVDR devices, see our EUDAMED registration service.
Does my data leave my computer?
No. The file is processed only in your browser and the tool sends nothing anywhere.
Does the tool upload the XML to EUDAMED?
No. You upload the file in the bulk upload section of EUDAMED. After the upload, you load the EUDAMED response file into the tool to see the result.
Can I use my own spreadsheet?
No. The tool reads only the MEDEX template and checks its version.
Is the tool in English?
Yes. The interface is in English, like EUDAMED.
