EU Authorized Representative for Compression Stocking Manufacturers: Rule 1, Rule 4 and the Class I Mandate
Medical compression stockings are class I under Rule 1 of Annex VIII to Regulation (EU) 2017/745, and Rule 4 gives the same class when they are used for compression over injured skin. No notified body is involved unless the stocking is supplied sterile. A manufacturer outside the EU must still designate a sole authorized representative under Article 11(1), and for a class I product that appointment is the whole of its EU-side structure.
Which products this page covers and the qualification question
This page covers medical compression stockings and hosiery, anti-embolism stockings for hospital use, compression bandages and compression garments for lymphoedema or burn scar management. The first question is qualification. A stocking is a medical device only when its manufacturer intends it for a medical purpose:
"‘medical device’ means any instrument, apparatus, appliance, software, implant, reagent, material or other article intended by the manufacturer to be used, alone or in combination, for human beings for one or more of the following specific medical purposes:"
Source: Regulation (EU) 2017/745, Article 2(1)
A graduated compression stocking intended for the treatment of venous insufficiency, for the prevention of deep vein thrombosis or for the management of lymphoedema is intended for the treatment, alleviation or prevention of disease and qualifies. Support hosiery sold as a comfort or fashion product with no medical claim does not, and the manufacturer should not CE mark it as a device. The claim on the label and in the instructions for use decides.
Rule 1: non-invasive, intact skin, class I
A compression stocking does not enter the body and is covered by the fall-back rule of Annex VIII:
"All non-invasive devices are classified as class I, unless one of the rules set out hereinafter applies."
Source: Regulation (EU) 2017/745, Annex VIII, Rule 1
MDCG 2021-24 lists devices used to immobilise body parts and/or to apply force or compression on them, with compression hosiery named among the examples, under Rule 1, class I.
Rule 4: compression applied over injured skin
Compression bandages and stockings used in the treatment of venous leg ulcers come into contact with injured skin. Rule 4 governs that contact and gives the same class when the purpose is compression:
"All non-invasive devices which come into contact with injured skin or mucous membrane are classified as:"
Source: Regulation (EU) 2017/745, Annex VIII, Rule 4
"class I if they are intended to be used as a mechanical barrier, for compression or for absorption of exudates;"
Source: Regulation (EU) 2017/745, Annex VIII, Rule 4, first indent
The result is class I under both rules. The remaining indents of Rule 4 (class IIb for wounds that have breached the dermis and heal by secondary intent, class IIa for managing the micro-environment of injured skin) concern the dressing placed on the wound, not the compression layer over it; those products are on the wound dressings page.
Sterile and measuring variants
Article 52(7) lets a class I manufacturer issue its own EU declaration of conformity after drawing up the technical documentation of Annexes II and III, but names three features that bring in a notified body with a limited role: sterile condition, measuring function and reusable surgical instruments. The first is the one that can apply here:
"(a) in the case of devices placed on the market in sterile condition, to the aspects relating to establishing, securing and maintaining sterile conditions;"
Source: Regulation (EU) 2017/745, Article 52(7)(a)
Anti-embolism stockings supplied sterile for the operating theatre are class I (Is). A stocking that is labelled with a compression value in mmHg is not automatically a device with a measuring function; MDCG 2021-24 sets three cumulative criteria, and the device must be intended to measure a parameter and display a result. A stocking applies compression, it does not measure anything, so the (Im) route does not apply to it. Plain, non-sterile medical compression hosiery is class I without any notified body.
Classification table
| Product variant | Class | Rule | Notified body |
|---|---|---|---|
| Graduated compression stocking for venous disease, non-sterile | I | Annex VIII, Rule 1 | None |
| Anti-embolism stocking for DVT prophylaxis, non-sterile | I | Annex VIII, Rule 1 | None |
| Anti-embolism stocking supplied sterile | I (Is) | Annex VIII, Rule 1; Article 52(7)(a) | Limited to sterility |
| Compression bandage or stocking over a venous leg ulcer | I | Annex VIII, Rule 4, first indent | None unless sterile |
| Lymphoedema or burn scar compression garment | I | Annex VIII, Rule 1 | None |
| Support hosiery with no medical claim | Not a medical device | Article 2(1) | Outside the MDR |
What the class I route requires
The manufacturer issues its own EU declaration of conformity after drawing up the technical documentation of Annexes II and III, maintains a quality management system under Article 10(9), assigns a Basic UDI-DI, registers the devices in EUDAMED and maintains a post-market surveillance report under Article 85.
The retention period for the documentation is in Article 10(8), and the representative keeps a copy for the same period under Article 11(3)(b). See class I medical devices for the full list of class I obligations.
The authorized representative: Article 11
Whether a compression stocking manufacturer needs an EU authorized representative does not depend on the class of the product. It depends on where the manufacturer is established. Article 11(1) is the operative sentence:
"Where the manufacturer of a device is not established in a Member State, the device may only be placed on the Union market if the manufacturer designates a sole authorised representative."
Source: Regulation (EU) 2017/745, Article 11(1)
Article 11(2) requires the mandate to be accepted in writing and to cover at least all devices of the same generic device group. Article 11(3) then lists the minimum tasks. For a textile manufacturer whose only devices are class I, the mandate is the only EU-side appointment the Regulation requires: no notified body, no certificate.
"(a) verify that the EU declaration of conformity and technical documentation have been drawn up and, where applicable, that an appropriate conformity assessment procedure has been carried out by the manufacturer;"
Source: Regulation (EU) 2017/745, Article 11(3)(a)
"(b) keep available a copy of the technical documentation, the EU declaration of conformity and, if applicable, a copy of the relevant certificate, including any amendments and supplements, issued in accordance with Article 56, at the disposal of competent authorities for the period referred to in Article 10(8);"
Source: Regulation (EU) 2017/745, Article 11(3)(b)
"(g) immediately inform the manufacturer about complaints and reports from healthcare professionals, patients and users about suspected incidents related to a device for which they have been designated;"
Source: Regulation (EU) 2017/745, Article 11(3)(g)
One mandate for the European Union and Türkiye
Medex is established in Türkiye and registered in EUDAMED as an authorized representative under SRN TR-AR-000057550, so a compression stocking manufacturer outside both the EU and Türkiye covers both markets with one mandate. MDCG 2022-16, footnote 1:
"The ’Union market’ refers to the territories of the European Union Member States, and due to the European Economic Area (EEA) is extended to Norway, Lichtenstein and Iceland, and via the Customs Union Agreement to Turkey."
Source: MDCG 2022-16, Guidance on Authorised Representatives, footnote 1
The Commission's Notice to Stakeholders of March 2022 draws the conclusion:
"manufacturers established outside the territory of the EU or Turkey only need to designate one authorised representative, either in the EU or in Turkey, in order to place medical devices on the market in the EU or in Turkey."
Source: European Commission, Notice to Stakeholders: EU-Turkey Customs Union Agreement in the field of medical devices, Section I.2
Placing the product on the Turkish market also requires registration in ÜTS (Ürün Takip Sistemi), Türkiye's product tracking system, a separate service under a separate contract: see ÜTS registration for foreign manufacturers and compression stocking ÜTS registration in Türkiye (Turkish).
What Medex does under the mandate
We verify that the EU declaration of conformity and technical documentation for each compression stocking device exist and that the notified body procedure has been carried out, keep copies for the period in Article 10(8), register in EUDAMED and check your Basic UDI-DI records, answer competent authority requests, cooperate on corrective actions and pass complaints and suspected incidents to you without delay. A person responsible for regulatory compliance is available in-house.
Class I compression products, sterile or not, fall in the band of €800 to 1,000 per year, fixed for three years from signature. Setup is €0 and a change of representative costs nothing; see pricing and EU authorized representative cost. We do not test compression values or classify products into compression classes. We are not a notified body and we do not find importers or distributors. Offices in Ankara and İstanbul.
The symbol that identifies the representative on your label is explained in our guide to the EC REP meaning. If some devices are still placed on the market under the former directives, see the authorized representative for legacy devices.
Related pages
Other class I textile and support groups with their own pages include orthoses, braces and supports, kinesiology tape and wound dressings. All groups are listed on the medical device categories page. The general guide is EU authorized representative.
Frequently asked questions
What class are medical compression stockings under the MDR?
Class I. They are non-invasive devices in contact with intact skin, and Rule 1 of Annex VIII applies. MDCG 2021-24 names compression hosiery among its Rule 1 examples of devices that apply force or compression on body parts.
Do compression stockings need a notified body?
Not unless they are placed on the market sterile. Article 52(7) lets the manufacturer of a class I device issue its own EU declaration of conformity; for sterile anti-embolism stockings, Article 52(7)(a) limits the notified body to the sterility aspects.
Is a stocking labelled in mmHg a device with a measuring function?
No. MDCG 2021-24 requires the device to be intended to measure a parameter and to display the result. A stocking applies a stated compression; it does not measure. The class I (Im) route of Article 52(7)(b) does not apply.
What if the stocking is used over a venous leg ulcer?
Rule 4 applies to contact with injured skin, and its first indent gives class I for devices intended for compression. The dressing on the ulcer itself is classified separately and may be class IIa or IIb.
Does a non-EU hosiery manufacturer need an authorized representative for class I products?
Yes. Article 11(1) applies to every manufacturer not established in a Member State. One Medex mandate covers the EU and, under the Customs Union arrangement described in the Commission Notice of March 2022, Türkiye.
Sources and further reading
Regulation (EU) 2017/745 on medical devices, consolidated text: eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02017R0745-20250110
MDCG 2021-24, Guidance on classification of medical devices: health.ec.europa.eu/medical-devices-sector/new-regulations/guidance-mdcg-endorsed-documents-and-other-guidance_en
MDCG 2022-16, Guidance on Authorised Representatives Regulation (EU) 2017/745 and Regulation (EU) 2017/746: health.ec.europa.eu/medical-devices-sector/new-regulations/guidance-mdcg-endorsed-documents-and-other-guidance_en
European Commission, Notice to Stakeholders: EU-Turkey Customs Union Agreement in the field of medical devices (March 2022): health.ec.europa.eu/system/files/2022-04/md_eu-turkey_customs-union_en.pdf
Request a fixed-price EU authorized representative quote for your compression stockings and garments.
Request a proposal · View pricing · Appoint Medex as your authorized representative
